MSA V-Gard Class E, G Type I Polyethylene Standard Slotted Hard Cap With Staz-On Suspension
V-Gard Protective Caps and Hats from MSA consist of a polyethylene shell and suspension system working together as a protection system. V-Gard headwear features advanced styling in either cap or hat styles, with the cap available in three sizes: small (6 - 7 1/8), standard (6 1/2 - 8) and large (7 - 8 1/2). V-Gard Caps and Hats meet or exceed the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1 1997,Class E and G.
MSA s Vanguard Type II protective helmets are so designed and must be used if lateral protection is desired Do not mix suspension and helmet size. Make sure the sizes match use only MSA suspensions on an MSA caps or hats. Failure to comply will reduce the energy-absorbing ability of the protective hat or cap. Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death V-Gard Caps and Hats are not specifically designed to protect against lateral blows from the front, side, or rear
HARDCAP V-GARD W/STAZ-ON