EZ Faucet Pro Touch-Free Automatic Faucet Adaptor

Not Rated, Be the First! | Login to Rate

Description

EZ Faucet Pro Touch-Free Automatic Faucet Adaptor - Kitchen Aids

New 2007 PRO Model

ActiveForever.com introduces the newest EZ Faucet Pro Touch-Free Automatic Faucet Adaptor. This exceptional assistive device changes your everyday kitchen or bathroom faucet into a touch-free, automated, germ-free household device. This allows you to wash your hands or food faster. This practical unit enables you to use the faucet without touching the handles; it regulates the temperature of the water, and helps you save water! This device is especially beneficial for those with one-handed use.

Designed to make your everyday life easier, the EZ Faucet Pro Touch-Free Infrared Sensor makes any existing sink faucet completely hands-free and automatic. You don't need to pay for a plumber or undergo a costly remodel. You can simply attach this infrared adapter to any existing faucet, and instantly the faucet becomes sensor activated with adjustable temperature and pressure. It's guaranteed to fit all standard faucets.

The EZ Faucet Pro Touch-Free System Provides:

Increased Sanitation & Hygiene:

Prevents cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles
Wash hands more thoroughly with preset one minute timer in automatic mode

Save Money:

Install the EZ Faucet system without throwing away existing faucets and without using a plumber.
Touch-Free operation can prolong the life of faucets by eliminating excess wear on rubber gaskets and washer.

Save Time:

Take less than 5 minutes to install

Safety and User Friendly:

Safely eliminates the concern of a child or senior leaving the tap running
Easy to use
Meets ADA requirements

Brand New 2007 PRO Model Improved Features:

Side Mount Design - Increased more than 30% of the working space below the sink area.
Improved Infrared Sensor -Detects faster and precisely with Point-N-Lock technology.
New Battery Compartment Design - Easier to open and close the battery slipcover.
Softer Touch Button - Better manual on/off control.
Compact Design - 20% smaller size than the previous model.
Low Energy Consumption - Increased battery life up to 1 1/2 years.

EZ Faucet Pro Touch-free Automatic Faucet Specifications:

Dimensions: W 2.75" x D 2.38" x H 3.50"
Weight: 0.35 LBS
Material: Plastic, Silicone, POM, unleaded brass
Color: Stainless Chrome
Quality: Commercial Grade
Uses 4 AAA Batteries (not included)
Water Pressure: 10 - 125psi
No Water Dripping Design
Infrared Sensor Range: 1.96" - 9.84" (5 - 25cm)
Sensor Mode: Auto or manual
Adaptor Thread Specifications: USA: 55/64"-27 (female/inside) 15/16"-27 (male/outside)

Quick Installation Guide:

Remove existing faucet aerator by turning counter-clockwise. Use the "Hexnut" Wrench, pliers or vice grips if it is tight.
After aerator is removed ensure that the rubber washer from existing aerator is removed. If the washer is not in the lip of the existing aerator, it should be inside the water exit of the existing faucet.
Before installing the EZ Faucet, check if your faucet exit has Inside Thread (male adapter) or Outside Thread (female adaptor)type. Male adapter type: Insert the Rubber Washer that comes with the package into the Adaptor. Female adapter type: Do not use any rubber washer.
Install EZ Faucet by turning the EZ Faucet Adaptor clockwise to attach to the faucet (first use fingers to tighten, and then use "Hexnut" Wrench for final snug fit).
Remove EZ Faucet battery cover and insert 4 new AAA Batteries (make sure batteries are inserted in correct directions as indicated in the battery holder). Close the battery door firmly.
Press and hold the Reset Button down for 3 seconds to adjust the sensor range automatically. EZ Faucet is ready for use after turning the faucet handles to ON position (adjust and check the water temperature properly before use).

Program the Sensor Range/Reset the EZ Faucet:

Turn the faucet handles to OFF position.
Press and hold the Reset Button for 3 seconds until the green light flashes and then release the button.
Wait until the green flashing light stops. Sensor range/EZ Faucet is set and ready for use after turning the faucet handles to ON position (adjust and check the water temperature properly before use - see Setting Water Temperature and Flow Rate selection).
Note: If the sensor is too sensitive, try putting your hand 3" - 5" below the sensor while programming the sensor range. This will shorten the sensor range.

Setting Water Temperature and Flow Rate:

Turn faucet handles to COLD position.
Press Manual Override Button once.
While the water is running, move existing faucet handles to adjust water temperature and flow rate.
After water temperature and low rate is set, press Manual Override Button to turn off the water.
Automatic feature is resumed.

Low Battery Indicator:

It is best to use 4 Alkaline Batteries with the same brand. They will last longer and keep EZ Faucet at the best performance. Approximately 1 to 2 weeks before the power of batteries is out, the orange color POWER LOW indicator light will begin to flash. Change all batteries as soon as possible. (See Charging Battery Section).

Changing Battery:

Turn the faucet handle to OFF position.
Remove the battery holder by pulling the battery holder out of the compartment.
Take 4 batteries one-by-one and replace new batteries (make sure to put batteries in correct directions).
Close battery holder by pushing the battery holder into the compartment until it is firm.
Then adjust the sensor range (See Program the Sensor Range section).

Warranty: 1 Year Manufacturer warranty

Returns: Due to hygiene purposes, this item is non-returnable. Please refer to ActiveForever’s return policy for more detailed information.

Related Searches: EZF003C, touchless faucet, automatic faucet

SKU

Product

Price