The Health Craft e2 Wall Mounted Trapeze is an in-home grab bar for those people who want to remain independent, but need just a little help getting out of bed. The trapeze design creates an easy to use grab bar that provides leverage to get up comfortably and easily. By mounting to the side of your wall the Health Craft e2 Trapeze is hidden and free from taking up valuable floor space.

The pull-pin on the trapeze arm allows for 7 locking positions. Finding a comfortable position for your Health Craft Wall Mounted Trapeze has never been easier. After use, simply pull the pin and lock the trapeze against the wall and out of sight! Along with choosing the horizontal location of your trapeze grab bar, the trapeze can also be set in 5 different positions away from the wall so the trapeze is always within arms reach. The Health Craft e2 can be mounted to basically any wall with traditional structural reinforcements, if no structural reinforcements are available; the Wall Plate is also available for purchase. Save space while maintaining your independence! Purchase the Health Craft e2 Wall Mounted Trapeze from ActiveForever.com today!

Health Craft e2 Wall Mounted Trapeze Features:

• Unique trapeze style grab bar creates leverage to make the easiest transition to getting up
• Space efficient design keeps floor open
• Easily pivots to out of the way and against the wall

Health Craft e2 Wall Mounted Trapeze Specifications:

• Health Craft e2 Wall Mounted Trapeze Users Guide
• Strap Range: 29"
• Swing Arm Length: 36"
• Swing Arm Diameter: 1.5"
• Grip Lengths: 6.25" (Shorter Grip) and 10.25" (Longer Grip)
• Weight Capacity: 300 lbs
• Please Note: No more than 150 pounds of force should be exerted on the ceiling mount at one time (for repositioning and sitting up assistance). This means that if one were to weigh the maximum 300 lbs it would be a risk to exert a full 300 lbs of force on this unit.

Deciding where to mount the trapeze Active Forever strongly recommends giving some thought for the optimal location of the e2 Wall Mount Trapeze before installing. It is always recommended to consider advice from your appropriate healthcare professional if you need help locating the support rail. The e2 Wall Mount Trapeze may be installed so that the trapeze handle is centered above the user, roughly 79" from the floor to the bottom rail. Setting the height of the Trapeze handle By using the included strap you can set the height of the trapeze by pulling some slack through the cross pieces of the strap buckle and pulling the buckle down to shorten the strap or sliding it to lengthen the strap. The trapeze handle is at a comfortable height when ones fingers can grasp around the bottom rail of the trapeze when lying down in bed. Testing the Location Have the user gently try the installed location of the trapeze handle and pole. Ensure that the trapeze handle is not too close to allow a comfortable sit up action.

Warranty:

One Year Limited

Returns: All Health Craft e2 Wall Mounted Trapeze returns are subject to ActiveForever's return policy and a 20% reprocessing fee. Please call Customer Service for a RMA (Return Merchandise Authorization) Number. Unauthorized Returns will not be accepted.

Related Searches:

A16298, STP-WM, STP-WP-WD, STP-HS, Health Craft e2 Wall Mounted Trapeze, HealthCraft, wall mounted grab bar, healthcraft products inc, healthcraft products, leverage bar, wallmounted trapeze, trapeze