Safety Bath Walk In Bathtub
Serenity Safety Bath Walk In Bathtub
The Serenity Safety Bath Walk In Bathtub is available in the (standard) Serenity Model or the (elongated) Stretch model.
The Serenity Safety Bath Walk In Bathtub is designed to allow ease of access for those unable to bathe in a regular tub, including those with physical challenges, limited mobility or the elderly. This walk in bathtub has a no slip surface on the floor and seat, a built-in hand held shower, and a grab bar on the door. All controls on the Safety Bath Walk In Bathtub are within easy reach. The seat and back are molded for maximum comfort and the sides of the walk in bathtub provide comfortable arm support.
These walk in bathtub models are designed to make it possible for the user to bathe independently or with minimal assistance. Purchase your Serenity Safety Bath Walk In Bathtub from ActiveForever today!
Serenity Safety Bath Walk In Bathtub Features :
Both models come with the following:
- Can be installed in any convenient location in the home.
- Built in non-slip surface on the floor and seat
- Seat and back are molded to allow maximum support & comfort
- Sides provide comfortable arm support
- Walk in bathtub uses less water than a regular bathtub
- Adjustable scald guard taps for maximum temperature setting to prevent burns and for even temperatures when other water outlets are being used
- Unique design allows you to sit in chest level water if so desired
- All pipes for whirlpool drain when tub is drained - improves sanitation
- Contains no internal heater, uses your home or facility water heater saving energy costs
- Outward swing door with choice of left hand or right hand hinge
- All plumbing fixtures are supplied. Unit is pre-plumbed
- Grab Bar on the Door
- Pressure balancing scald guard taps
- Hand shower unit
- Lower door seal lip is 4 inches from the floor
- Approximate installation time is 4-6 hours.
- Seat height (floor to seat):11.5"
- This unit is finished on three sides for plumbing; access to the walk in bathtub can only be obtained through one door
- Delivery charge is for curb side delivery only
Specifications: Serenity & Stretch Models
Safety Bath Walk In Bathtub Installation Instructions
| Capacity | 1 Adult |
| Dimensions | Serenity: 33.5"W x 29.5"H x 36.5"L Stretch: 33.5"W x 29.5"H x 40.5"L |
| Door Swing | Right or Left Hand |
| Tub Construction | Marine grade gel coat figerglass with fire retardant properties |
| Tub Surface | "Kohler" white - CSA approved bath gel coat supported with fire retardant fiberglass |
| Approvals | CSA, , UL/ANSI, |
| Door Clearance Required | 30.0" - 28.0" with door jambs removed |
| Length | Serenity: will replace a 5ft. bathtub Door closed: 36.5" With drip tray: 40.5" Door open: 59.5" Stretch: Door closed: 40.5" With drip Tray: 40.5" Door Open: 63.5" |
| Width | Serenity & Stretch 33.5" |
| Height | Serenity & Stretch 29.5" |
| Seat Height | Serenity: 10.5" - with 4" removable booster seat Stretch: 14.5" - no booster seat provided |
| Door Opening Width | 16.5" |
| Step in Height | 4.25" |
| Booster Seat | Serenity model only - 3" and 4" height |
| Optional Faucet Panel | Pre-plumbed Moen Posi-Temp TL 183 faucet, includes tub spout with diverter and pop up drain & hand-held shower |
| Weight | 120lbs. Shipping weight 200lbs. |
| Capacity | Serenity: 300lbs. or up to 6ft. tall Stretch: over 300lbs and/or over 6ft. tall |
| Water Capacity | Serenity: 20-25 gallons Stretch: 25-30 gallons |
| Door Seal | Extruded silicone rubber gasket |
| Door Lock | Stainless Steel Cantilever Mechanism |
| Hinges | Stainless Steel |
| Access Panels | Measures: 8" x 8" Located on 3 sides of the shroud Access is also possible from below the bathtub |
| Trim Boards | Laminated press board with water proof coating |
| Drain size | 1.5" ABS connection |
| Drain Location | When viewed from outside the tub, drain is always on the right hand side, regardless of door swing |
| Drain Size (Drip Tray) | 1.25" |
| Jets | Options: Soaker Tub with no jets 4 directional/adjustable Water Massage Jets 12 Warm Air Jets |
| Water Pump/Air Blower | CSA, UL approved Model V-Water massage 3/4 HP, 120V, 60HZ Model A-Air Massage 9.5A 120V, 60HZ |
| Power Input | 110/120V - 15A GFI outlet required for jetted tubs |
| Piping | PVC Flex |
| Optional Heated Seat | Stretch & Serenity Self regulating Requires a 15A GFI outlet |
| Optional Corner Skirt and Trim Boards | 3 corner finishing skirt with trim boards will finish off the area where a standard bathtub was removed. |
The benefits of whirlpool action have been well documented and it has been found that many people with circulatory problems, arthritis and sore muscles as well as many other ailments can benefit from the use of a whirlpool in this walk in bathtub.
Warranty: 5 year warranty on bathtub, door handle, and latching mechanism. - 1 year parts and labor, remaining 4 years parts only. 1 year warranty on hydrotherapy components, heated seat, hand-held shower, drains and booster seat. Lifetime warranty on door seal.
Return policy: Due to hygiene purposes, this item is non-returnable.
Please refer to ActiveForever's return policy for more detailed information.
Please provide daytime contact information, so we can obtain proper specifications from you. Click here to download our pre-installation questionnaire.
Hawaii orders, please call us at 1-800-377-8033 to place your order.
Safety Bath Walk In Bathtub Ships ground only. Please allow 2-4 weeks for delivery.
Buy now and receive Free Ground Shipping within the Continental US!
| SKU | Product | Price | |
|---|---|---|---|
| A19060 01 STD | Standard Safety Bath 36" Long | $4,979.95 | |
| A19060 02 STRETCH | Stretch Safety Bath 41" Long | $5,479.95 | |
| A19060 05 | Standard Without Whirlpool | $4,589.00 | |
| A19060 06 | Stretch Without Whirlpool | $5,289.00 | |
| A19060 07 | Standard with 12 Jet Warm Air Massage | $5,699.00 | |
| A19060 08 | Stretch with 12 Jet Warm Air Massage | $6,099.00 |
|
The Safety Bath Walk In Bathtub |
|---|



, UL/ANSI, 



