Ultimate Makeup Mirror 10X/1X Lighted (10X/1X Ultimate Lighted Make-Up Mirror )

Instructions for Expanding the 10X/1X Ultimate Lighted Make-Up Mirror:

• Place the unit on a flat, level surface that is a minimum of 10 inches in depth.
• Locate the tension knob on the base portion of the unit.
• Position the unit so that the tension knob is nearest to you.
• The round portion of the unit contains the 10X magnifying mirror and the 1X-flat mirror. At this point the round portion should be facing upward.
• Place one hand on the units base at a point farthest from you and then use the other hand to firmly grasp the round portion of the unit near the base.
• Lift the round portion upward and toward you until you have attained the desired angle and height.
• While continuing to hold the base unit with one hand, grasp the lowest position of the round portion of the unit with your other hand and pull upward to extend the support arm to the height you desire.
• Unit will function properly without tightening the tension screw, but should you desire to use the tension screw, care must be taken to not over-tighten.