Close

XeroSox Waterproof Cast Cover

This product has 12 options to choose from...
Picture of XeroSox Waterproof Cast Cover

XeroSox® Waterproof Cast Cover

The XeroSox® Waterproof Cast Cover is a revolutionary waterproof cast and bandage protector. Because of its patented vacuum seal, it will keep your cast or bandage completely dry. At any time, you can easily check the vacuum seal by simply seeing a dimple in the pump. With the XeroSox Waterproof Cast Cover you can "see and feel the seal!"

The XeroSox® Waterproof Cast Cover is also used for immediate postoperative physical therapy, allowing hydrotherapy right after surgery, which helps prevent swelling and stiffness and aids in a speedy recovery. Those with prosthetics may find using the XeroSox Waterproof Cast Cover quicker and simpler than removing their prosthesis. Also, with your lower extremity prosthesis in place and protected by Xerosox, you may now be able to stand comfortably in a pool or the ocean.

The XeroSox® Waterproof Cast Cover is rugged. It is made of durable high quality surgical latex. The special Non-Skid Grid protects the sole and helps keep the cast protector from slipping. The Built-In Pump not only creates the vacuum seal but also works as a gauge showing that the vacuum is intact and the cast cover is not leaking.

To learn about how to measure for the Xerosox®, visit our Xerosox Measuring Guide

XeroSox® Cast Cover Features:

  • Built-in Pump
  • Waterproof
  • Made of durable, high-quality surgical latex
  • Cast sizes are for legs and arms
  • Non-skid grid on base of feet to prevent slipping
  • Can be used with prosthetics
  • The XeroSox Waterproof Cast Cover contains natural rubber latex
  • Designed for children and adults - Please measure for accurate sizing
  • Non-skid grid inside and outside the cast protector
  • You can see and feel the seal
  • Great for casts, bandages & prosthesis
  • Easy to use sizing instructions
  • Designed to fit snugly
  • Recommended for up to 45 minutes of use

XeroSox® Waterproof Cast Cover Specifications:

  • Available for Arms or Legs
  • To release the air from the watertight seal, simply lift up the corner of the cast
  • Don't worry if the cast protector is too long. The excess material of the cast cover will flatten down when the air is pumped out.
  • Reusable
  • Great for surfing!

Sizing: Measure Limb Circumference

Arm: Measure the circumference of the arm about two inches above (proximal to) the cast or bandage. If the end of the cast is very close to the elbow, measure mid upper arm (bicep).

Do not measure around the cast, but around the bare arm or leg.

XeroSox Type Arm Circumference Length of Arm
X-Small Arm 6-7" 15"
Small Arm 7-9" 21"
Medium Arm 9-10" 26"
Large Arm 10" and up 28.5"
Small Half Arm 7.5 - 9.5" 16.5"
Large Half Arm 9.5" and up 18.5"

Leg: Measure the circumference of the leg just above the cast or bandage. If the end of the cast is very close to the knee, measure mid thigh.

*Important note - while measuring, if you are between two sizes (or it's close), always go with the larger size

The circumference is more important than the length because it is critical for a good seal.

XeroSox Type Leg Circumference Length of Leg
X-Small Leg 7.5-11" 19"
Small Leg 14-16.5" 29"
Medium Leg 16.5-21" 33"
Large Leg 21" and up 37"
Small Half Leg 10-13" 21"
Large Half Leg 13" and up 23.5"

Note:the half arms and half legs are not normally used for children. Pediatric patients almost always use full arm or leg XeroSox®.

Note: The opening of the Xerosox should be smaller than your arm or leg circumference

If your circumference falls between the X-Small Leg and the Small Leg, select the Small Half Leg

Fitting Instructions:

Slide on the XeroSox® Waterproof Cast Cover

Attach the open end of the pump to the outside valve. Stretch on the XeroSox ® Waterproof Cast Cover so that it completely covers the cast or bandage, and an additional inch (25mm) or more of bare skin. The top cuff should be smooth against the skin. Be aware that sharp fiberglass on a cast or a sharp fingernail can rip the XeroSox® Waterproof Cast Cover. Cover sharp objects with a bandage or a sock with the toe cut out.

Instructions Step 1

Pump out the Air

With the pump attached to the outside valve, repetitively squeeze the pump until it stays flat. Remove the pump and push on the safety cap. After creating the vacuum, observe the XeroSox ® Waterproof Cast Cover before going into the water. As long as the XeroSox ® Waterproof Cast Cover stays vacuumed (tightly wrinkled), it is sealed and completely watertight.

Instructions Step 2

Slide the XeroSox® Waterproof Cast Cover off

When you are finished using the XeroSox® Waterproof Cast Cover, lift up the cuff to let the air back in. The XeroSox ® Waterproof Cast Cover should now feel loose. Slide the XeroSox ® Waterproof Cast Cover off.

Instructions Step 3

Warranty: XeroSox® Waterproof Cast Cover carries a 90 Day Warranty from date of sale. Warranty on defects only

Returns: Due to the hygiene or rehabilitation nature of this product, it is non-returnable.

Please refer to ActiveForever's return policy for more detailed information.

Related Searches: zero socks, xero sox, xero socks, broken leg, FA-12, FA-14, FA-16, FA-18, HA-13, HA-15, FL-12, FL-14, FL-16, FL-18, HL-13, HL-15

Looking for special pricing on larger quantities? Call our experts at 1-800-377-8033 for a free quote.

Leverage our buying power & expertise. We serve GOV/EDU/MIL, employers, facilities & inventors.

  Account set up & astute solutions guidance.
  Free edu catalogs for your staff & community.

Engage in our innovative medical & health care, sales, education & marketing programs.

  Lead gen & education comms programs.
  Vendors/Investors: full-service solutions.

Get Discovery Digest e-news updates, discounts, and exclusive offers.

  
  EZ Publish our Discovery Digest free.